Hughes 9502 One-piece Terminal
The most advanced machine-to-machine BGAN terminal in the world. The Hughes 9502 One-piece Terminal has the highest industry rating for ingress protection (IP66), exceptionally low power consumption, and an integrated antenna ideal for un-attended sites with M2M applications such as SmartGrid, environmental monitoring, surveillance, pipeline control, well site automation and other long-term unmanned SCADA systems.
For SmartGrid, SCADA, M2M
Somewhere far way, on a lonely windswept plain, a silent, dust-covered sentinel pings the skies, making sure your critical data makes its way home…
And if it’s drawing less than 1 Watt in idle mode, then for sure it’s a Hughes 9502 One-piece Terminal with integrated antenna. Sure, it might be lonely out there, but the Hughes 9502 One-piece likes it that way. Built specifically for long-term, un-attended sites with M2M applications, or SCADA systems that require long-distance communications links for critical data exchanges, the single-piece design is the world’s most-advanced BGAN M2M all-IP terminal.
They Don’t Get Any Tougher than This
Rated IP66 for ingress protection, the 9502 One-piece BGAN terminal is at the top of the industry scale. With a 66 rating, the unit is fully-sealed against particles and dust, and able to operate for long-term deployments in regions subject to wind-borne particulates or dust-storms. It also means that the single-piece construction with integrated antenna is highly-resistant to wet-weather of all kinds, able to withstand high-powered jets of water from every direction. Properly secured using the optional mount, the Hughes 9502 One-piece has a wind-survival speed of 161 kph (100 mph). Its an all-climate, all-weather terminal, with an operational temperature range that goes from sub-freezing to extreme heat: -40° to +75° C (-40° to +176° F). With these operational parameters, you can deploy the Hughes 9502 One-piece anywhere the INMARSAT system of communication satellites reaches, and be confident that your systems will be in contact and connected even in extreme conditions.
Remote locations that rely on solar battery arrays, or other stored-energy solutions to remain in operation need efficient, low-power devices that help conserve energy over the long-term. The low power-consumption of the Hughes 9502 makes it ideal for sites that are remote, off-the-grid, or power-challenged. Drawing less than 1 watt in idle mode, less than 20 watts sending and less than 3 watts receiving makes the Hughes 9502 the right solution for sites with sensitive power budgets, enabling the Hughes 9502 to provide end-to-end IP connectivity for even the most remote, power-challenged locations.
Why Don’t You Visit Anymore?
The smart design of the Hughes 9502 One-piece includes a commitment that future firmware releases will be uncommon, so site visits by your or your technicians will be reduced. Future modem updates will qualify for no-charge over-the-air (OTA) upgrades, saving you further time and money. SCADA or M2M applications that are in truly remote locations are also helped by the Integrated IP Watchdog function that ensures "always-on" network connectivity: the Hughes 9502 restores power and PDP connection to itself automatically following a loss of power or IP connection, so no manual intervention is required to recover from an outage. The Hughes 9205 One-piece also includes back-up and out-of-band management to primary site communications, so if a primary service is disrupted, other out-of-band communications, such as L-Band, can be utilized to diagnose and correct the problem.
Whether its forestry, land-management, oil and gas facilities and pipeline management, SmartGrid monitoring, surveillance and security, or any SCADA or M2M application that requires long-term, reliable IP-based BGAN connectivity with minimal-to-no manual intervention, the Hughes 9502 One-piece is up to the challenge. Low-power requirements and overall smart design make it the most-advanced all-IP machine-to-machine BGAN terminal in the world.
Let’s face it: un-attended M2M applications are lonely things when you really think about them. Why not send the BGAN terminal that likes working alone: the Hughes 9502 One-piece.
- Most-advanced M2M all IP BGAN terminal in the world
- No minimum connection charge
- Minimum billing increment of 1 Kbyte
- Ultra-low power consumption
- Idle: < 1W
- Transmit: < 20W
- Receive: < 3W
- No usage charge for over-the-air (OTA) modem software upgrades
- Integrated IP Watchdog to ensure "always-on" network connectivity. No manual intervention required to recover from an outage
- Auto-on/auto-context activation automatically restores power and PDP connection to itself following loss of power and/or IP connection
- Remote control via SMS provides management platform for command and control to the terminal using SMS, including configuration, debugging, and remote access to Web interface
- Built-in GPS receiver
- Security enhancements with extended layers of embedded security options
- No PC required for basic installation
- RJ-45 Ethernet port
- USB Type B for connection to PC for configuration of terminal
- RS-232 (DB9) to external NMEA 0183-based GNSS device (e.g., GLONASS receiver)
- Hughes M2M Terminal
- Locking bar for padlock
- Mounting screws and washers